The DM_MC6 is an input device for connecting voltage and current electrodes to the VCC MC2, VCC MC6, and VCC MC8 instruments. The DM MC6 is a small, shielded unit that can be mounted close to individual Ussing chambers and is recommended for use with both our EasyMount Ussing Chamber Systems or for classical Ussing chamber systems. Each DM MC6 also contains a single channel “dummy membrane” for use in testing the the functionality of voltage/current clamp.

Input jacks: 2 mm pin tip. Connection to voltage/current clamp: choice of 4’ or 7’ shielded cable with modular plugs. One DM MC6 is required for each clamp channel.

The VCC MC8 is an “extended” chassis version of the VCC MC6 multichannel voltage/current clamp so that it accommodates a total of 8 voltage/current clamp modules in a 24” wide chassis. Otherwise, the instrument has the same features as the VCC MC6 including the extremely useful Master Control feature and single cable interface to our ACQUIRE & ANALYZE data acquisition system. This unit is available only with the DM_MC6 input modules above. Option HV increases the output compliance to ± 35V DC. This is required only for certain types of experiments. Please consult the manufacturer.